Tips For Using A Milwaukee Corded Circular Saw

 

Cutting with a Milwaukee Corded Circular Saw on a do-it-yourself project can initially seem daunting, but the tool is easy once you get the hang of the basics. Here are a few tips if you want to know how to use a circular saw securely to make confident cuts, crosscuts, and rip cuts.

1.     Start By Making Precise Marks

Unlike miter saws, circular saws don't cut squarely out of the box. Therefore, marking the board with a precise line is essential. Before you lay down a framing square, be mindful of the spot where you want to cut. Verify your work by drawing a dark, straight line at the mark.

2.   Finer Lines With Chalk

Using a chalk line is the quickest technique to create straight-cutting lines on plywood. However, twang it briefly in midair to remove excess chalk before you place it on the plywood. Your mark will be less hazy and easier to follow after that. This must be done immediately following the filling of your chalk line.

3.   Light Up The Space

It doesn't matter how precise your cutting line is if you can't see it. So, check the lights before using the Milwaukee Corded Circular Saw. Shadows cast by you or your circular saw can make markings difficult to see, even in well-lit workplaces. If the line disappears into the shadows as you cut, adjust the board's tilt or move your work light.

4.   Keep An Eye On The Blades 

Notches or marks on the front of the shoe indicate the cutting path of the blade on every saw. However, sawdust may get all over them, or the shoe may become deformed, throwing off the guide. Keeping an eye on the blade and line while you cut will lead to better results. To maintain a clear view, use the built-in blowers or your mouth to blow away any sawdust covering the line.

5.    Hold In Before Cutting Angles

If the blade guards don't touch the board at a right angle, they tend to get stuck. Ensure your workpiece is securely clamped down, even if it means using your knees. Keep your left thumb on the lever that retracts the blade guard while cutting angles or slopes. When you feel the saw hesitate slightly, begin to retract the guard.

6.   Safety Means Accurate

When it comes to precise cutting, protective gear like earmuffs, goggles, and masks can be beneficial. How? Looking through a cloud of sawdust while squinting and blinking makes it challenging to see the cutting line. Also, you won't have to worry about splinters, dust, or noise as much, so you'll be more patient and less prone to make a hasty, careless cut.

Conclusion

The Milwaukee Corded Circular Saw is the best option if you're looking for a tool that can easily handle different tasks. In many cases, they can even replace a miter or table saw. The tips can help everyone with the tool, allowing them to complete their project safely. WCE Shop is the place to go for consumable materials, equipment, and supplies required for maintenance, repair, and operations. Check the website to browse through the collection.